St-06H25N12TYU (VC-87)
Der Schweissdraht kaltgezogener Stahl-Schweißen (Belag) und die Herstellung von Elektroden
Einstufung
| Land |
Abschnitt |
Kategorie |
| GUS, Russland, Ukraine |
Materialien zum Schweißen und Löten |
Stahlschweißdraht |
Chemische Zusammensetzung
| Standard |
Fe, % |
Si, % |
Mn, % |
Cr, % |
Ti, % |
Ni, % |
Al, % |
P, % |
C, % |
S, % |
|---|
| GOST 2246-70 |
56.27–62.9 |
0.6–1 |
< 0.8 |
24–26.5 |
0.6–1 |
11.5–13.5 |
0.4–0.8 |
< 0.03 |
< 0.08 |
< 0.02 |
Informationen zum Lieferanten
Properties
| Property |
|---|
| Note Fluctuations in the tensile strength in one coil of wire with a diameter of more than 1.4 mm should not exceed 90 N / mm2. |
| It is allowed to increase the upper limit of temporary tensile strength for wire with a diameter of more than 2 mm to 1090N / mm2. |
| For welding Diameter: 0.3 - 0.5 mm; Temporary resistance: 890 - 1390 MPa |
| Diameter: 0.8 - 1.5 mm; Temporary resistance: 890 - 1340 MPa |
| Diameter: 1.6mm; Temporary resistance: 890 - 1290 MPa |
| Diameter: 2mm; Temporary resistance: 790 - 1190 MPa |
| Diameter:> 2 mm; Temporary resistance: 690 - 1040 MPa |
| For the manufacture of electrodes Diameter: 1.6 mm; Temporary resistance: 690 - 990 MPa |
| Diameter: 2mm; Temporary resistance: 690 - 990 MPa |
| Diameter:> 2 mm; Temporary resistance: 640 - 940 MPa |
| Density: 7.73 g / cm3 |
Standards
Beschreibung der chemischen Elemente
| Element |
Maßeinheiten |
Beschreibung |
| Fe |
% |
Eisen |
| Si |
% |
Silizium |
| Mn |
% |
Mangan |
| Cr |
% |
Chrom |
| Ti |
% |
Titan |
| Ni |
% |
Nickel |
| Al |
% |
Aluminium |
| P |
% |
Phosphor |
| C |
% |
Kohlenstoff |
| S |
% |
Schwefel |